Colleges and Universities Offering Bachelor of Engineering (Honours) (Mechanical Engineering) in Malaysia

Institutions Offering Bachelor of Engineering (Honours) (Mechanical Engineering)

•  National Energy University (Universiti Tenaga Nasional), Kajang  
  Course entry requirements:
  For Malaysian Students:
  
  (i) Sijil Tinggi Persekolahan Malaysia (STPM)
  -Pass STPM with a minimum CGPA of 2.00 and at least Grade C for Mathematics and any 1 relevant Science Physical and Pass English in SPM Level.
  
  (ii) A-Level
  -Pass A-Level with credit in Mathematics and 1 Science Physical subject.
  
  (iii) Matriculation
  -Physical / Technical Stream. Min CGPA 2.00.
  
  (iv) Foundation
  -Foundation from other institution with minimum CGPA 2.00.
  
  (v) Diploma
  -Pass Diploma in related field with minimum CGPA 2.00.
  
  (vi) UEC (Unified Examination Certificate)
  -Pass UEC with a minimum of grade B in 5 subjects including Advance Mathematics and Science Physical subjects.
  
  (viii) International Baccalaureate Diploma (IB)
  -Pass IB with total points at 24 in 6 subjects including Maths and 1 Physical Science subject.
  
  (ix) HND(UK) Diploma
  -Pass HND in related field with minimum CGPA 2.00.
  
  (x) SAME/WACE/AUSMAT
  -Pass with average marks of 55% with Maths and any Physical Science.
  
  (xi) Others
  -Other equivalent qualifications recognised by Government of Malaysia.
  
  ENGLISH REQUIREMENTS
  
  For Malaysian Students:
  
  Malaysian students may enrol without MUET. However, students are required to complete MUET during duration of study (before graduation). IELTS (5.0 and above) or TOEFL (500 and above) or TOEFL Internet Based Test (42 and above) is also accepted.
  
  MUET – Malaysia University English Test
  Achieve Band 1 and above
  
  For International Students:
  
  International students are required to have one of the English proficiency score stated below to enrol in UNITEN. Bachelor students who do not fulfill this English requirement are required to sit for the Intensive English Programme (IEP) and pass the requirement below before starting their Bachelor programme.
  
  MUET – Malaysia University English Test
  Achieve Band 3 and above
  
  IELTS – International English Language Testing System
  Achieve 5.0 and above
  
  TOEFL - Test of English as a Foreign Language
  Achieve 500 (TOEFL) or 42 (TOEFL Internet Based Test) and above
  
  Course duration: 4 years
  
  Intake: January, June, September
  
  Mode of study: Full time
  
  Course content:
  Year 1: Semester 1
  - Advanced Calculus & Analytical Geometry
  - Engineering Graphics
  - Principles of Programming
  - Engineering Materials
  - Tamadun Islam Tamadun Asia
  
  Year 1: Semester 2
  - Differential Equations
  - Manufacturing Process Laboratory
  - Mechanics I: Statics
  - Linear Algebra
  - Technical Communications
  - Islam / Moral & Civil Society I
  
  Year 1: Special Semester
  - No subject
  
  Year 2: Semester 3
  - Manufacturing Processes
  - Thermodynamics I
  - Mechanics II: Dynamics
  - Engineering Instrumentation
  - Electrical Measurement Lab
  - Islam / Moral & Civil Society II
  
  Year 2: Semester 4
  - Numerical Methods For Engineers
  - Mechanics of Materials
  - Mechanics and Materials Laboratory
  - Mechanics of Fluids I
  - Fluids Mechanics Laboratory
  - Theory of Machines
  
  Year 2: Special Semester
  - No subject
  
  Year 3: Semester 5
  - Thermodynamics II
  - Mechanics of Fluids II
  - Modeling & Control of Dynamics Systems
  - Machine Design
  - Machine Design Laboratory
  - Electronics & Microprocessors
  - Entrepreneurship & Financial Management
  
  Year 3: Semester 6
  - Heat Transfer
  - Heat Transfer & Applied Thermodynamics Laboratory
  - Mechanical Vibration
  - Computer Aided Engineering
  - Personal Financial Management
  - Local MPU Compulsory [U2]
  - Engineers in Society
  
  Year 3: Special Semester
  - Industrial Training
  
  Year 4: Semester 7
  - Final Year Project I
  - Project Management
  - Electro-Mechanical Systems
  - Hubungan Etnik
  - Integrated Design Project I
  - Technical Elective I
  
  Year 4: Semester 8
  - Final Year Project II
  - Integrated Design Project II
  - Technical Elective II
  - Technical Elective III
  - Technical Elective IV
  
  Year 4: Special Semester
  - No subject
  
  
•  Petronas University of Technology(Universiti Teknologi Petronas), Seri Iskandar  
  (i) STPM
  -Minimum Grade C in Mathematics,Physics and Chemistry
  
  (ii) A-Level or Equivalent
  -Minimum Grade C in Mathematics,Physics and Chemistry
  
  (iii) International Baccalaureate (IB)
  -Minimum Total Points of 24 with a minimum Point 4 in Mathematics,Physics and Chemistry
  
  (iv) Matriculation
  -Minimum final CGPA of 2.00/4.00
  
  (v) Foundation in Relevant Field from Universiti Teknologi PETRONAS
  -Minimum Grade: Pass Foundation Program in relevant field from UTP with at least a final CGPA of 2.00/4.00
  
  (vi) Foundation in Relevant Field from a Recognised Institution
  -Minimum final CGPA of 3.00/4.00
  
  (vii) Diploma in Relevant Field from a Recognised Institution
  -Minimum final CGPA of 2.00/4.00
  
  (viii) UEC - Senior Middle Level (SML)
  At least Grade B in English,Mathematics,Advanced Mathematics,Physics and Chemistry
  
  (ix) Australian Matriculation Programme
  Pass with minimum Grade C (OR 60% in
  Mathematics OR Specialised Mathematics, Physics and Chemistry:
  -Year 12 Certificate, Australian Capital Territory
  -Higher School Certificate (HSC), New South Wales
  -Northern Territory Certificate Education (NTSE)
  -Queensland Senior Certificate
  -South Australian Certificate of Education
  -Tasmanian Certificate of Education (TCE)
  -Victorian Certificate of Education (VCE)
  -Western Australia Certificate of Education (WACE)
  
  (x) Others
  Local Students:
  Other equivalent qualification recognised by the Malaysian Government may also be considered.
  
  Malaysian students must fulfill the following additional requirements:
  -Candidate must be a Malaysian citizen
  -Application must be made using the final examination semester results
  -Minimum Grade C (Credit) in Bahasa Melayu at SPM
  -Minimum Grade C (Credit) in Bahasa Inggeris at SPM
  
  International Students:
  Other equivalent qualification recognised by the Malaysian Government may also be considered.
  International students must fulfill the following additional requirements:
  -Application must be made using the final examination semester results
  -IELTS score of 5.0 or TOEFL paper based score of 500 or equivalent.
  
  Course duration: 4 years
•  First City University College, Petaling Jaya  
  Course entry requirements:
  (i) STPM – Minimum 2Cs (including Mathematics and Physics)
  
  (ii) UEC – Minimum 5Bs (including Mathematics and Physics)
  
  (iii) GCE A-LEVEL – Minimum 2Cs (including Mathematics and Physics)
  
  (iv) FOUNDATION/MATRICULATION – Pass with minimum CGPA 2.0
  
  (v) DIPLOMA – Pass with minimum CGPA 2.0 / Diploma (Level 4, MQF) in the related field
  
  (vi) OTHER QUALIFICATIONS – Equivalent qualifications which are recognized by the Malaysian Qualifications Agency
  
  Course duration: 4 years
  
  Intake: February 2022, June 2022, September 2022
  
  Course content:
  (i) Year 1
  -Engineering Mathematics I
  -Engineering Statics
  -Introduction to Electrical and Electronic Engineering
  -Engineering Drawing
  -Engineering Mathematics II
  -Engineering Materials I
  -Engineering Dynamics
  -Machine Drawing
  -Engineering Practice and Communication Skills
  
  (ii) Year 2
  -Engineering Mathematic III
  -C Programming Techniques
  -Fluid Mechanics I
  -Thermodynamics I
  -Solid Mechanics I
  -Solid Mechanics II
  -Thermodynamics II
  -Fluid Mechanics II
  -Introduction to Microprocessor
  -Instrumentation and Measurement
  
  (iii) Year 3
  -Mechanical Engineering Design I
  -Heat Transfer
  -Engineering Materials II
  -Manufacturing Processes
  -Engineering Economics
  -Integrated Design Project
  -Mechanical Engineering Design II
  -Control Systems
  -Numerical Analysis and Statistics
  -Electrical Power and Machines
  -Integrated Design Project
  
  (iv) Year 4
  -Final Year Project
  -Operations and Quality Management
  -Sustainable Energy Systems
  -Mechanical Vibration
  -Elective I
  -Final Year Project
  -Professional Practice
  -Project management and Product Development
  -Entrepreneurship
  -Elective II
  -Finite Element Method
  -Hydraulics and Pneumatics
  -Ergonomics
  -Air Conditioning and Refrigeration
  -Manufacturing Systems
  -Engineering Tribology
  -Upon completion of Year 3, students are required to undergo 12 weeks of industrial training.
•  UOW Malaysia KDU University College, George Town  
  Course entry requirements:
  
  GCE A Levels :
  -2 Principal Passes (2Es) inclusive of Mathematics and Physics
  
  
  
  STPM :
  -2 Principal Passes (2Cs) inclusive of Mathematics and Physics
  * minimum Grade C (GP 2.0)
  
  
  
  UEC :
  -Min. 5 Credits (5Bs) inclusive of Mathematics and Physics
  
  
  
  Diploma / Foundation Studies :
  -Pass with minimum CGPA of 2.00
  
  English Requirement
  Local Student:
  -Band 3 in MUET
  
  
  
  International Student:
  -Band 5.5 in IELTS; or a min score of 46(IBT) or 454(PBT) in TOEFL ; or score 51 and above for Pearson English Test
  
  Course duration: 4 years
  
  Course content:
  Core
  (i) YEAR 1
  -Engineering Mathematics 1
  -Statics
  -Engineering Materials
  -Computer Programming for Engineers
  -Engineering CAD
  -Industrial Design
  -Engineering Mathematics 2
  -Dynamics
  -Mechanical Workshop Practices
  -Principles of Electrical and Electronics
  
  (ii) YEAR 2
  -Fluid Mechanics 1
  -Solid Mechanics 1
  -Electric Machines
  -Statistics
  -Engineering Ethics, Safety and Environment
  -Numerical Method
  -Solid Mechanics 2
  -Fluid Mechanics 2
  -Engineering Thermodynamics
  -Instrumentation and Measurement
  -Engineering Mathematics 3
  
  (iii) YEAR 3
  -Advanced Thermodynamics
  -Control Systems
  -Manufacturing Processes
  -Mechanical Vibrations
  -Principles of Microcontroller Systems
  -Engineering Project Management
  -Component Design
  -Capstone Project
  -Heat Transfer
  -Computer Aided Engineering
  
  (iv) YEAR 4
  -Computer Aided Manufacturing
  -Total Quality Management
  -Renewable Energy Systems
  -Principles of Sustainable Engineering
  -Elective (2 subjects)
  -Industrial Training
  -Final Year Project
  
  Electives:
  -Air Conditioning and Mechanical Ventilation
  -Internal Combustion Engines
  -Advance Materials Technology
  -Materials Selection in Design
•  Tunku Abdul Rahman University College, Kuala Lumpur  
  Course duration: 4 years
  
  Intake: January, May/June, November
  
  Course content:
  Engineering Mathematics/ Applied Engineering Mathematics/Advanced Engineering Mathematics
  
  • Programming for Engineers
  
  • Project Management and Finance
  
  • Engineering Materials/ Strength of Materials/ Mechanics of Solids
  
  • Statics/ Dynamic of Mechanical Systems/ Dynamics
  
  • Theory of Machines
  
  • Fluid Mechanics/ Applied Fluid Mechanics/ Computational Fluid Dynamics
  
  • Thermodynamics/ Applied Thermodynamics/ Heat Transfer
  
  • Engineering Design
  
  • Industrial Control & Automation
  
  • Control Systems Engineering/ Design of Control Systems
  
  • Language, Mata Pelajaran Pengajian Umum (MPU) and Co- Curricular Courses:
  
  English Language, English for Communication, English for the Profession, Tamadun Islam dan Asia, Hubungan Etnik, Bahasa Kebangsaan A, Entrepreneurship, Moral dan Etika/Contemporary Malaysian Issues, Co-curricular.
•  University of Technology Sarawak, Kuching  
  Course entry requirements
  -Pass STPM/A-level with full pass in Mathematics and Physical Science; or
  -Pass UEC with five (5) Grade B’s including Mathematics and Physical Science; or
  -Pass Matriculation / Pre-U/ Foundation in Science from recognised institutions with minimum CGPA 2.0; or
  -Pass Diploma in related field from recognised institutions with minimum CGPA 2.0; or
  -Other equivalent qualifications recognised by the Malaysian Government and approved by University Senate.
  
  Course duration: 4 years
•  Universiti Tunku Abdul Rahman, Kampar  
  Course duration: 4 years
  
  Mode of study: Full time
  
  Intakes: January, May, October

---

More Degree Courses in Malaysia

---

View all courses in Malaysia

---